22.05.2025
10 Common Defects of Lighting Products
We have prepared a short list of the 10 common defects in lighting products that were found on the inspection sites of suppliers in China, India and Vietnam.
Startseite
/ Ihre Kategorie
/ Lighting Inspection
1. Production Process and Main Equipment for Lighting Products
Production routes vary by luminaire construction, light source, and mounting method. The following nine-stage framework covers the main control points commonly found in floor lamp, table lamp, ceiling light, and chandelier production; the approved BOM, drawings, sample, and factory control plan remain the project-specific reference.
Click to review the detailed production process and main equipment for lighting products.
2. On-Site Inspection Focus for Lighting Products
Our on-site inspections focus on the production and shipment issues most likely to cause electrical hazards, unstable installation, poor lighting performance, or customer complaints.
Electrical Safety
- Check internal wiring, terminal positions, polarity, protective earthing, and insulation.
- Perform agreed production screens such as earth continuity, dielectric strength, and cord anchorage.
Lighting Performance & Functions
- Check light-up consistency and specified input, CCT, CRI, or luminous-flux values.
- Verify dimming, sensors, remotes, smart, charging, or emergency functions as applicable.
Labels & Shipment Readiness
- Confirm model, rating, class, IP, and market markings, plugs, fuses, and instructions.
- Verify accessories, barcodes, protective packing, and carton condition.
Structure & Assembly
- Verify bases, arms, shades, diffusers, mounting or suspension parts, and fasteners.
- Check stability, alignment, adjustable-part retention, and lamp-holder fit.
3. Lab Testing & Compliance Support for Lighting Products
These items are typically handled through laboratory testing or compliance projects, not routine on-site inspection. The applicable route depends on the luminaire type, electrical class, mounting method, light source, functions, and destination market.
Luminaire & Component Safety
- IEC 60598-1 applies with the relevant Part 2: IEC 60598-2-4 for portable luminaires and IEC 60598-2-1 for fixed general-purpose luminaires. LED controlgear and modules require applicable component standards.
EMC, Optical & Photobiological Performance
- Support CISPR 15, IEC 61547, and IEC 61000 requirements, together with CIE S 025 or ANSI/IES LM-79 and IEC 62471-7 where applicable.
Market-Specific Compliance
- North American routes may include UL 153 for portable luminaires and UL 1598 for fixed luminaires. EU projects may also require ecodesign, energy labelling, RoHS and REACH review.
4. Typical Lighting Problems We Help Buyers Catch Before Shipment
Electrical & Thermal Problems
- Incorrect wiring or reversed lamp-holder polarity
- Loose earth or terminal connections and dielectric failure
- Overheating, abnormal noise, or early driver failure
Mechanical & Appearance Problems
- Unstable bases, loose arms or poor shade fit
- Weak mounting or suspension parts and damaged decoration
- Sharp edges, scratches, colour differences or coating defects
Performance & Shipment Problems
- Flicker or inconsistent CCT, CRI and luminous flux
- Dimming, sensor, remote or smart-function failure
- Wrong labels, missing accessories or inadequate packaging
5. Which Lighting Products Do We Have the Most Experience With?
Table & Desk Lamps
- Portable · Plug-In · Task Lighting
Floor Lamps
- Portable · Standing · Decorative or Task
Ceiling & Flush-Mount Lights
- Fixed · Surface-Mounted
Pendant Lights & Chandeliers
- Fixed · Suspended · Decorative
Wall-Mounted Luminaires
- Fixed · Indoor or Outdoor
Recessed Luminaires
- Fixed · Recessed Installation
6. Our Lighting Quality Control Services
Product Inspection
Verify lighting-product workmanship, assembly, functions, agreed safety screens, accessories, packaging and labelling on-site.
Supplier Audits
Evaluate controls for metalwork, finishing, wiring, LED assembly, testing, ageing, packing and traceability.
Laboratory Testing
Support safety, EMC, optical, photobiological, environmental and market-specific compliance testing.
Customized QC Checklists / Sample Check
Adapt inspection points to the structure, mounting method, light source, functions, approved sample and market.
Bulb Dimming Test
Water proof test(IPX6)
7. How V-Trust Helps You Find the Right Lighting Supplier
We dispatch experienced auditors to assess supplier capabilities before you place deposits, mitigating potential risks.
Factory Audit
Quick verification of supplier legitimacy through:
- Business license and certification checks
- Basic production capacity review
- Contact-person and factory-location verification
In-Depth Factory Audit
A comprehensive evaluation covering:
- Metalwork, finishing, wiring and assembly capability
- LED module, driver and safety-critical component control
- Ageing, optical and routine electrical test setup
- Quality system and component or batch traceability
8. How V-Trust Controls Lighting Product Quality
Sample Check
Before mass production, our engineers compare the approved sample with specifications for construction, finish, stability or mounting, internal wiring, light appearance, and key functions.
Production Monitoring
During production, we focus on safety-critical components, metalwork and finishing, LED modules and drivers, internal wiring, assembly, routine electrical testing, ageing, and defect correction.
During Production Inspection
When around 10–20% of the order is completed, sampled units are checked for recurring wiring, assembly, appearance, lighting performance, and function problems while corrective action is still possible.
Pre-Shipment Inspection
Before shipment, we verify finished quantity, workmanship, installation or stability, functions, agreed safety screens, labels, plugs, accessories, and protective packaging.
Container Loading Supervision
We confirm quantities, carton integrity, fragile-part protection, handling and loading methods, shipment mix, container condition, and seal information.
9. The Most Related Sourcing Fairs in Asia
27–30 October 2026
Hong Kong International Lighting Fair (Autumn Edition)
Hong Kong Convention and Exhibition CentreResidential, decorative, commercial, smart and connected lighting products.
https://www.hktdc.com/event/hklightingfairae/en
22–25 October 2026
China (Guzhen) International Lighting Fair
Guzhen Convention and Exhibition Center, ZhongshanDecorative lighting, fixtures, components, smart lighting and supporting manufacturing resources.
https://mlighting.jiagle.com/lighting-fair/general-information/
9–12 June 2027
Guangzhou International Lighting Exhibition
China Import and Export Fair Complex, GuangzhouLighting products, LED technology, components, controls, and application solutions.
guangzhou-international-lighting-exhibition.hk.messefrankfurt.com
Why Choose V-Trust for Lighting Products Quality Control?
20
Years of Experience
650+
Trained Inspectors
10
Asian Countries
13,000
Satisfied Clients
Asia's leading product inspection company with full-time, professionally trained inspectors and comprehensive accreditation for inspection, audit, and lab testing services.
Lighting Products Quality Control: Frequently Asked Questions (FAQ)
Why inspect lighting products before shipment?
Lighting products combine electrical, thermal, optical, and mechanical requirements. Inspection helps identify unsafe wiring, unstable assembly, inconsistent light output, functional failures, and packaging problems before shipment.
Do portable and fixed luminaires use the same standard?
They share IEC 60598-1 general requirements but normally use different Part 2 standards. Portable table and floor lamps generally follow IEC 60598-2-4, while fixed ceiling lights and chandeliers generally follow IEC 60598-2-1.
Which tests can be performed during an on-site inspection?
Depending on factory equipment and the agreed checklist, inspectors can check assembly, stability or mounting, wiring, polarity, earth continuity, dielectric strength, cord anchorage, input values, light output, functions, labels, and packaging.
Does on-site inspection replace laboratory testing?
No. Factory checks are production-quality screens. Full safety, EMC, optical, photobiological, and market-certification testing must follow the applicable laboratory route.
Can V-Trust inspect dimmable, smart, or rechargeable lamps?
Yes. The checklist can cover dimming, sensors, remotes, app pairing, charging, battery condition, and operating time. Additional components, battery, radio, and market requirements may apply.
How many days in advance should I book the inspection?
We recommend booking at least three days in advance. Next-day inspection may be possible in some manufacturing areas depending on team availability.
How long does it take to get my report?
The official report is typically reviewed and made available within 24 hours after inspection. A same-day draft may also be available if needed.
Can laboratory testing standards be selected based on my market?
Yes. Applicable requirements depend on mounting method, electrical class, light source, driver, IP claim, special functions, and destination market. We can align the testing scope to the applicable route.
Request Your Inspection Today
Ready to ensure the quality of your lighting products? Contact our team to discuss the luminaire type, mounting method, functions, destination market, and specific quality concerns.